• Feature
  • Spec
  • Support

Model MVP22U+IPS Page down, Right, Left, Page up, Zoom in & Esc)
Screen size 21.5" diagonal Battery AAA alkaline dry cell x 1
Backlight LED Pen Power Consumption 950uA (Max.)
Aspect Ratio 16:9 Connection
Display area (H x V) 476.64 x 268.11 mm VGA in undetachable, with a 1.5m 15pin D-sub & Dc-in 2 in 1 cable
Native resolution 1920 x 1080 DC in DC 12V,3A
Pixel pitch (H x V) 0.24825 x 0.24825 mm User control
Brightness (typical) 250cd/㎡ Control type OSD / 5 keys
Contrast ratio (typical) 1000:1,dynamic 50000:1 Factory preset modes 720 x 400 @ 70Hz,640 x 480 @ 60Hz/72Hz/75Hz
Response time (typical) 14 ms 800 x 600 @ 60Hz/72Hz/75Hz,
Viewing angle (typical) H:178°(89°/89°), V:178° (89°/89°), @ CR ≥ 10 1024x 768 @60Hz/70Hz/75Hz
Number of colors 16.7M 1280 x [email protected] 60Hz/75Hz [email protected] 60Hz/75Hz
Color management ICC profile, 6500° K whitepoint default [email protected] 60H,[email protected] 60Hz
Electrical Specs OSD Language 16 languages (Eng/Deu/Fre/Ita/Spa/Por/Ch-s/Ch-t
Horizontal & Vertical Frequency H:30~ 81 kHz;V:56 ~ 75 Hz Pol/Rus/Kor/Dan/Dut/Fin/Swe/Jap)
Pixel frequency 148.5 MHz Physical Specs
Video signal input (R/G/B) 0.7 Vpp / 75 ohms ( analog video signals ) Unit dimension (W x H x D) 521.64 mm x 384.93 mm x 24.5 mm
Syns signal (TTL level) LH: 2.0 ~ 5.0 Vpp, LL: 0 ~ 0.8 Vpp Weight Net 4.6 kg ,gross 6.0 kg
Power supply type External adapter Stand adjustability Tilt: 15°~ 90°
Power supply (Adapter) Input 100-240 VAC, 50/60 Hz, Output 12VDC 3A VESA mounting 75 x 75 mm
Power consumption max:<28 watts;saving:<1w;off<0.5w Kensington lock yes
Speakers N/A Accessories
Plug & play DDC1 / 2B / CI Pen kits package X 1
Interactive Technology Pen holder X 1
Interactive method Electromagnetic resonance method Power adapter X 1
Tablet resolution 4000 LPI (lines per inch) Power cord X 1
Tracking speed Approximately 200 points per second User's manual X 1
Pen Pressure Sensitive 2048 Levels CD x 1 (Device drivers and bundled software)
Inking Start 5g Reliability&Certificates
Pen Detectable Tilt and Height Tilt 45°, height 10mm (between tip and glass surface) Temperature & Humidity 0-40°C (32-104°F), 20-80% (non-condensing)
Reading accuracy ±0.5 mm (center) Certificates FCC / CE
Data communication mini-USB interface
Operation System support Windows XP/Vista/7/8, MAC OS 10.4 or above
Interactive Application Software Free Notes, MyScript Stylus (Vista/XP);
Express keys 8 User Assignable keys, (Factory preset with Enter, Zoom out,
No. Symptom Suggested Action
101 No power, the LED indicator not lit Be sure the AC adapter and power cord is connected.
Be sure the AC adapter output must be 12V 3A.
Warning: Please use the original AC adapter, otherwise damage will be caused or affect the safety.
Check that electrical outlet or try reconnect to other wall receptacle.
102 No picture, the LED indicator is light up (orange) May be the monitor and the computer are in dormancy mode, please tray presses your keyboard or move the mouse to reactivate the system.
Check that signal cable should be completely connected to the computer, please try connecting again.
Check that signal connector if any pin bent or broke, please try rectifying it.
If you use laptop PC, check that the external (RGB) output is selected.
Be sure recommend display resolution used, if signal out of frequency, please restart PC and press F8 run Safe Mode then set resolution to [email protected] or below.
103 Picture is fuzzy, or disturbances on the screen Be sure the recommend display resolution used.
Adjust pixel frequency (Clock) and Phase or press hot-key to auto adjustment.
104 Screen image is not centered or sized properly Adjust pixel frequency (Clock) and Phase or press hot-key to auto adjustment.
105 Missing one of the primary colors (RED, GREEN, or BLUE) Check that signal cable and make sure that none of the pins are bent or broke.
Adjust RGB color or select color temperature.
106 Picture bounces or a wave pattern is present in the picture Move electrical devices that may cause electrical interference.
Be sure the signal cable and power cord with good connected.
Be sure the AC adapter output must be 12V 3A.
201 The pen is no function Be sure the pen power switch is turn on.
Check the battery whether worn out; please try replacing the pen battery.
Check that USB cable should be completely connected to the computer; please try re-plugging the USB cable.
Restart your computer or your application.
Reinstall USB Tablet Driver if some device and/or software installed.
202 The cursor move Incorrectly Move electrical devices that may cause electrical interference.
Check the battery whether worn out; please try replacing the pen battery.
Check that USB cable should be completely connected to the computer; please try re-plugging the USB cable or restart you computer.
Update USB Tablet Driver.
Replace tablet pen.
203 The side switch does not work Be sure that when you press the side button, the pen tip is within 10mm (or below) of the display surface and your pen tip is not against the display surface.
Be sure that the side button is set to the proper function you are expecting to occur for the application. (Open the Pen Pad control panel to check it).
204 The cursor is far out from pen tip or poor pen pressure sensitive The accuracy of pen cursor please refers to specification, if you found over this specs, please try do the Screen Calibrating.
Check whether the pen tip is too short. If yes replace the pen tip.
Open the Pen Pad control panel to re-set.
 
Copyright © Yiynova Technology Limited. ALL Rights Reserved.