• Feature
  • Spec
  • Support

Model MVP10UHD+IPS Express keys 8 User Assignable keys(Factory preset with Esc,Zoom in ,
Type 10.1" Tablet LCD,IPS PANEL,LED backlight Page up, Left, Right, Page down, Zoom out,Enter )
Display area (H x V) 216.96 (W)X135.6 (H) mm (10.1" diagonal) Mode switch Digitizer mode / Tablet monitor mode
Native resolution 1024 x 800 Display modes 640 x 350 @ 70Hz 720 x 400 @ 70Hz
Pixel pitch (H x V) 0.1695 x 0.1695 mm 640 x 480 @ 60Hz 800 x 600 @ 60Hz
Luminance of white (typical) 220cd/㎡ 1024 x 768 @ 60Hz 1280 x [email protected] 60Hz
Contrast ratio (typical) 600:1 Physical Specs
Response time (typical) 25ms Unit dimension (W x H x D) 326.33 x 194 x 18.2 mm
Viewing angle (typical) H:160°(80°/80°), V: 160°(80°/80°) ( CR >=10 ) Weight Net 0.75kg, Gross 1.2kg
Number of colors 16.7M Package 390*220*58mm
Electrical Specs Accessories
Horizontal & Vertical Frequency H:31~ 48 kHz;V:55 ~ 70 Hz Pen kits package x 1
Pixel frequency 68.93MHz USB cable x 1
Video signal input Analog video input via USB Manual x 1
built in video card that runs over any USB 2.0 connection U-Stand x 1
Power supply 5VDC 0.8A CD x 1
USB powered Reliability&Certificates
Power consumption max: 4.1 watts; saving:<0.7w; off<0.4w Temperature & Humidity 0-40°C (32-104°F), 20-80% (non-condensing)
Interactive Technology Certificates FCC / CE
Interactive method Electromagnetic resonance method
Tablet resolution 4000 LPI (lines per inch)
Tracking speed 200 points per second
Pen Pressure Sensitive 2048 Levels
Inking Start 5g
Pen Detectable Tilt range Down to 45° from vertical
Pen Readable Height 8mm (between pen tip and glass surface)
Connection
USB USB x1
User control
Brightness Control 2keys (brightness up/down) up/down
Troubleshooting
Before contacting service personnel, you might be able to try the suggested actions that are appropriate to your problem.

No. Symptom Suggested Action
101 No picture Check the Mode Switch was turn on to Tablet Monitor mode.
Check USB c able should be completely connected to the computer and monitor.
Check computer whether are in dormancy mode. Press keyboard or move the mouse to Reactivate the system.
Try adjusting the brightness.
Check that the computer is switched on.
If you use laptop PC, check that the external (RGB) output is selected.
Try to change USB ports.
Check that OS is Windows XP/Vista and Windows 7.
102 Picture is gray Adjust the brightness controls.
When the brightness of the screen lowers after being used for a certain period and the function of the display is affected, send it to our authorized service center for repair.
103 Picture noise Move electrical devices that may cause electrical interference.
104 Picture is fuzzy Physical resolution is 1024 x 600. Under the resolution, it will get the best display.
201 The pen is no function Check APO whether actives, click pen tip could recall active status.
Check the battery whether worn out? If yes, please replace the pen battery.
Try using mouse to double check, if mouse also no function, please restarting your computer or your application.
Try to reinstall the USB Tablet driver.
202 The cursor move Incorrectly Eliminate interference from nearby electrical devices.
Try r estarting your computer for double check.
203 The side switch does not work Be sure that when you press the side button, the pen tip is within 5mm of the display surface and your pen tip is not against the display surface.
Be sure that the side button is set to the proper function you are expecting to occur for the application.
204 The cursor is far out from pen tip The a ccuracy of pen cursor please refers to specs, if you found over this specs, please to do the Screen
Calibrating.
 
Copyright © Yiynova Technology Limited. ALL Rights Reserved.